Master Cylinder - Front Right-Hand Calliper Brake Pipe: Removal - Refitting - Renault Duster 2007 Manual

MECHANICAL COMPONENT CONTROLS

Master cylinder - front right-hand calliper brake pipe: Removal - Refitting

LEFT-HAND DRIVE, and WITHOUT ANTI-LOCK BRAKING SYSTEM
Equipment required
pedal press
Tightening torquesm
brake pipe union on the
master cylinder
brake pipe union on the
brake hose
REMOVAL
REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Fit a pedal press to the brake pedal to limit outflow.
a Remove:
- the front right-hand wheel (see 35A, Wheels and
tyres, Wheel: Removal - Refitting, page 35A-1) .
- the front engine cover (if fitted to the vehicle).
a Unscrew the brake pipe union (1) on the brake hose.
a Remove the brake pipe from the retaining bracket.
a Unclip the brake pipe from its clip (2) .
14 N.m
14 N.m
a Unscrew the brake pipe union (3) from the master
cylinder.
a Remove the soundproofing clips on the bulkhead (if
fitted to the vehicle).
a Move aside the soundproofing (if fitted to the vehi-
cle).
a Unclip the brake pipe from its clip.
a Remove the brake pipe between the master cylinder
and the front right-hand brake hose.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the brake pipe between the master cylinder
and the front right-hand brake hose.
a Refit the brake pipe on the retaining bracket.
a Clip the brake pipe into its clip.
a Screw the brake pipe union on the front right-hand
brake hose.
a Screw the brake pipe union on the master cylinder.
a Torque tighten:
117821
- the brake pipe union on the master cylinder (14
N.m),
- the brake pipe union on the brake hose (14
N.m).
37A-5
37A
118631