Renault Duster 2007 Manual page 408

Manual gearbox: Removal - Refitting
K4M, and JR5
a Refit the front bumper (see Front bumper assem-
bly: Exploded view) .
a Top up the gearbox (see 21A, Manual gearbox,
Manual gearbox oils: Draining - Filling, page
21A-1) .
a Refit the engine undertray.
a Connect the clutch control pipe to the clutch slave
cylinder.
a Bleed the clutch control circuit (see Clutch circuit:
Bleed) (37A, Mechanical component controls).
a Refit:
- the gearbox control cable sleeve stops on the gear-
box,
- the gear control cables to the gearbox.
a Refit the front wheels (see Wheel: Removal - Refit-
ting) (35A, Wheels and tyres).
a Connect the vehicle speed sensor connector.
a Refit:
- the crankshaft position sensor (see Crankshaft
position sensor: Removal - Refitting) ,
- the expansion bottle on its support.
a Torque tighten the expansion bottle nuts (8 N.m).
a Refit:
- the wiring mounting on the gearbox,
- the wiring mounting on the injection computer
mounting,
- the injection computer (see Petrol injection com-
puter: Removal - Refitting) (17B, Petrol injection),
- the air resonator (see Air resonator: Removal -
Refitting) (12A, Fuel mixture),
- the earth strap nut onto the injection computer sup-
port.
a Torque tighten the earth strap nut on the injection
computer support (8 N.m).
a Refit:
- the battery tray,
- the battery (see Battery: Removal - Refitting)
(80A, Battery).
MANUAL GEARBOX
21A-17
21A