Lower Engine Tie-Bar: Removal - Refitting - Renault Duster 2007 Manual

Lower engine tie-bar: Removal - Refitting

Tightening torquesm
rear suspended engine
mounting bolt on the
subframe
rear suspended engine
mounting bolts on the
gearbox
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove the engine undertray.
II - REMOVAL OPERATION
JR5
a Remove:
- the rear suspended engine mounting bolt (1) from
the subframe,
- the rear suspended engine bolts (2) from the gear-
box,
- the rear suspended engine mounting.
ENGINE MOUNTING
105 N.m
105 N.m
24758
19D-8
REFITTING
I - REFITTING OPERATION
a Refit:
- the rear suspended engine mounting,
- the rear suspended engine mounting bolts.
a Torque tighten:
- the rear suspended engine mounting bolt on
the subframe (105 N.m),
- the rear suspended engine mounting bolts on
the gearbox (105 N.m).
II - FINAL OPERATION
a Refit the engine undertray.
a Tighten the engine undertray bolts.
19D