Renault Duster 2007 Manual page 415

5th gear sprockets and synchronisers: Removal - Refitting
JR5
a Refit the fifth gear pinion using the tool (16) (Bvi.
1175).
a Remove the tool (Bvi. 1175).
a On the input shaft, refit:
- the lock washer,
- the idle gear supporting ring,
- the fifth idle gear fitted with its synchroniser ring,
- the fifth gear hub fitted with its synchroniser
springs.
a Refit:
- the fifth gear fork and selector rod,
- a new washer for the input shaft nut,
- a new nut for the input shaft,
- a new bolt for the output shaft.
a Change into fifth gear by moving the fifth gear fork.
a Torque tighten:
- the input shaft nut (190 N.m),
- the output shaft bolt (80 N.m).
a Put the gearbox in neutral.
a Fit a new pin for the fifth gear fork using the tool.
III - FINAL OPERATION
a Proceed in the reverse order to removal.
MANUAL GEARBOX
141711
21A-24
a Top up the gearbox (see 21A, Manual gearbox,
Manual gearbox oils: Draining - Filling, page
21A-1) .
a Carry out a function test.
21A