Power-Assisted Steering Pump: Removal - Refitting; Power Assisted Steering - Renault Duster 2007 Manual

POWER ASSISTED STEERING

Power-assisted steering pump: Removal - Refitting

K9K, and STANDARD HEATING RECIRCULA TION
Special tooling required
Ms. 583 Pipe clamps.
Tightening torquesm
power-assisted steering
pump bolts
power-assisted steering
pump high pressure
union
power assisted steering
pump support bolt on
the sump
power-assisted steering
pump high pressure
pipe support mounting
bolt
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see 02A, Lift-
ing equipment, Vehicle: Towing and lifting).
a Remove:
- the front right-hand wheel (see 35A, Wheels and
tyres, Wheel: Removal - Refitting, page 35A-1) ,
- the engine undertray,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the accessories belt (see Accessories belt: Re-
moval - Refitting) (11A, Top and front of engine).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Fit the hose clamps on the hydraulic inlet and outlet
pipes of the power assisted steering pump.
a Remove the hydraulic input hose clip on the pump
using the.
21 N.m
21 N.m
21 N.m
21 N.m
a Disconnect the inlet hose (1) .
a Remove the bolt (2) from the high pressure pipe
support on the power-assisted steering pump.
a Unscrew the power-assisted steering pump high
pressure pipe union (3) .
a Disconnect the power-assisted steering pump high
pressure pipe.
a Fit plugs to the pipe and power assisted steering
pump openings to prevent impurities from entering.
a Remove the power-assisted steering pump bolts (4)
on the multifunction support.
36B-5
36B
24736