Renault Duster 2007 Manual page 779

Special notes on the conformity check for the air conditioning function:
The air conditioning system conformity check is divided into four parts. The parts relate to the four sub-functions of
the air conditioning system: heating, cold loop, user selection and passenger compartment ventilation. The statuses
and parameters related to these sub-functions are listed with their respective computers.
Special notes: The air conditioning control panel does not control electrical components (other than the passenger
compartment fan assembly) and it cannot support fault finding.
Note:
The interpretation of statuses, parameters and commands is also split into several sections. Everything controlled
by the air conditioning control panel is explained in the two Air conditioning sections (62B and 62C). On the other
hand, signals from other computers are explained in the fault finding sections for these computers (see conformity
check).
Customer complaints - Fault finding chart
If the test with the diagnostic tool is OK but the customer complaint is still present, the fault should be processed by
customer complaints.
A synopsis of the general procedure to follow is provided on the following page in the form of a flow chart.
MR-453-X79-62C000$010.mif
V1
CLIMATE CONTROL
Fault finding – Introduction
62C-4
62C