Replacing An Ssd Drive On An Re-S-1800; Figure 85: Installing An Mx480 Routing Engine - Juniper MX240 Hardware Manual

See Also
See Also

Replacing an SSD Drive on an RE-S-1800

Copyright © 2019, Juniper Networks, Inc.
NOTE: If enhanced IP network services is configured on the chassis, all routing
engines must be rebooted after synchronizing the routing engines. For more
information on synchronizing the routing engines, see Synchronizing Routing
Engines.

Figure 85: Installing an MX480 Routing Engine

Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
Replacing Connections to MX240 Routing Engine Interface Ports on page 240
MX240 Routing Engine Description on page 59
SCB-MX Description
Effect of Taking the MX240 Host Subsystem Offline
Taking an MX240 Host Subsystem Offline
Replacing Connections to MX240 Routing Engine Interface Ports on page 240
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
Synchronizing Routing Engines
Each RE-S-1800 Routing Engine supports two solid-state drives (SSD) specified by
Juniper Networks. The RE-S-1800 ships with one SSD installed in the slot labeled
. The spare SSD is Juniper part number SSD-32G-RE-S.
SSD 1
the arrangement of storage drive slots on a RE-S-1800 Routing Engine.
Chapter 4: Maintaining, Installing and Replacing Components
Figure 86 on page 234
SATA
shows
233