Replacing An Ssd Drive On An Re-S-X6-64G; Figure 87: Re-S-X6-64G Storage Drive Slots - Juniper MX240 Hardware Manual

Replacing an SSD Drive on an RE-S-X6-64G

Copyright © 2019, Juniper Networks, Inc.
Each RE-S-X6-64G Routing Engine supports two solid-state drives (SSD) specified by
Juniper Networks. The RE-S-X6-64G ships with two SSDs installed in the slot labeled
DISK1 and DISK2 . Figure 87 on page 235
a RE-S-X6-64G Routing Engine.
Replacing an SSD drive in a RE-S-X6-64G Routing Engine consists of the following two
stages:
Replacing the SSD Drive in the Routing Engine.
1.
Copying vmhost and Junos OS to the replaced SSD.
2.

Figure 87: RE-S-X6-64G Storage Drive Slots

Chapter 4: Maintaining, Installing and Replacing Components
shows the arrangement of storage drive slots on
235