Replacing An Mx2000 Cb-Re - Juniper MX2020 Hardware Manual

During normal operations:
The bi-color OK/FAIL LED on the SFB faceplate is lit green steadily.
The bi-color OK/FAIL LED on the SFB faceplate is blinking green.
The bi-color OK/FAIL red LED on the SFB faceplate is off.
Issue the show chassis sfb command to display information about the SFBs. The output is similar to the
following:
user@host> show chassis sfb
Slot State
0 Online
1 Online
2 Online
3 Online
4 Online
5 Online
6 Online
7 Online
For further description of the output from the commands, see the
Command Reference.
RELATED DOCUMENTATION
Removing a Switch Fabric Board (SFB)

Replacing an MX2000 CB-RE

IN THIS SECTION
Removing a CB-RE from an MX2000 Router | 501
Installing an MX2020 CB-RE | 503
Installing an MX2010 CB-RE | 505
Uptime
1 hour, 11 minutes, 22 seconds
1 hour, 11 minutes, 11 seconds
1 hour, 11 minutes, 1 second
1 hour, 10 minutes, 50 seconds
1 hour, 10 minutes, 39 seconds
1 hour, 10 minutes, 28 seconds
1 hour, 10 minutes, 18 seconds
1 hour, 10 minutes, 7 seconds
Junos OS System Basics and Services
500