Juniper MX240 Hardware Manual page 337

Copyright © 2019, Juniper Networks, Inc.
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
PFE #3
Plane 0: Links ok
Plane 1: Links ok
Plane 2: Plane enabled
Plane 3: Plane enabled
Plane 4: Plane enabled
Plane 5: Plane enabled
Fabric plane details of all MPCs are also displayed.
Verify if the
show chassis fabric summary
7.
'check' state. This indicates that the fabric plane has an error. You can try to recover
the fabric plane to normal operation by issuing the
command, followed by the
offline
where <#> equals the fabric plane in error.
NOTE: After you issue the
request chassis fabric plane <#> online
fabric summary
and to verify the current state of the fabric planes.
Verify if any major alarms are displayed:
8.
user@host> show chassis alarms
Alarm Time Class Description
2011-06-01 13:37:43 EDT Minor Require a fan tray upgrade
2011-06-01 13:37:26 EDT Minor Backup RE Active
In this example, the major alarms are no longer displayed, and the upgrade is
successfully completed.
Disable the upgrade configuration by issuing the
9.
command and then the
You can delete that command by issuing the
10.
and then the commit command.
Verify the SCBE-MXs before you finish by issuing the
11.
user@host> show chassis hardware
Item Version Part Number Serial Number Description
CB0 REV 02 750-031391 YE8505
CB1 REV 07 710-031391 YL6769
Chapter 4: Maintaining, Installing and Replacing Components
command output shows fabric planes in the
request chassis fabric plane <#> online
request chassis fabric plane <#> offline
commands, issue the
command to verify that the fabric plane errors are rectified
set chassis state cb-upgrade off
command.
commit
delete chassis state cb-upgrade
Enhanced MX SCB
Enhanced MX SCB
request chassis fabric plane <#>
command,
and
show chassis
command
show chassis hardware command:
337