Figure 64: Installing The Router In The Rack - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
190
Slide the router onto the mounting shelf until the mounting brackets contact the rack
4.
rails. The shelf ensures that the holes in the mounting brackets of the chassis align
with the holes in the rack rails.
Install a mounting screw into each of the open mounting holes aligned with the rack,
5.
starting from the bottom.
Visually inspect the alignment of the router. If the router is installed properly in the
6.
rack, all the mounting screws on one side of the rack should be aligned with the
mounting screws on the opposite side and the router should be level.

Figure 64: Installing the Router in the Rack

NOTE: This illustration depicts the router being installed in an open-frame
rack. For an illustration of the mounting hardware required for a four-post
rack or cabinet, see
Rack or Cabinet" on page
"Installing the MX240 Router Mounting Hardware for a
170.
Copyright © 2019, Juniper Networks, Inc.