Troubleshooting The Mx240 Mics; Troubleshooting The Mx240 Mpcs - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
See Also

Troubleshooting the MX240 MICs

Problem
Solution
See Also

Troubleshooting the MX240 MPCs

Problem
354
MX240 Flexible PIC Concentrator (FPC) LEDs on page 103
Maintaining MX240 FPCs on page 264
Holding an MX240 FPC on page 266
Storing an MX240 FPC on page 269
Description: The MICs are not functioning normally.
Check the status of each port on a MIC by looking at the LED located on the MIC
faceplate. For information about the meaning of LED states on different MICs, see the
MX Series Interface Module Reference
Check the status of a MIC by issuing the
MIC slots in the MPC are labeled
user@host> show chassis fpc pic-status
Slot 0 Online
PIC 0 Online
PIC 1 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 2 Online
PIC 0 Online
PIC 1 Online
For further description of the output from the command, see the
MX240 Modular Interface Card (MIC) Description on page 116
Maintaining MX240 MICs on page 279
Description: The MPCs are not functioning normally.
.
show chassis fpc pic-status
and
PIC 0/1 PIC 2/3
MPC Type 2 3D EQ
1x 10GE XFP
1x 10GE XFP
MPC 3D 16x 10GE
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
MS-DPC
MS-DPC PIC
MS-DPC PIC
CLI command. The
, left to right:
.
CLI Explorer
Copyright © 2019, Juniper Networks, Inc.