Replacing An Mx240 Ac Power Supply Cord; Disconnecting An Mx240 Ac Power Supply Cord; Figure 133: Installing An Ac Power Supply - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
See Also

Replacing an MX240 AC Power Supply Cord

314

Figure 133: Installing an AC Power Supply

MX240 AC Power Supply Description on page 42
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
AC Power Supply Electrical Specifications for the MX240 Router on page 44
Disconnecting an MX240 AC Power Supply Cord on page 314
1.
Connecting an MX240 AC Power Supply Cord on page 315
2.

Disconnecting an MX240 AC Power Supply Cord

To disconnect the AC power cord:
Switch off the dedicated customer site circuit breaker for the power supply, and
1.
remove the power cord from the AC power source. Follow the instructions for your
site.
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis.
Move the AC input switch next to the appliance inlet on the power supply to the off (
3.
position.
Remove the power cord from the power supply.
4.
Copyright © 2019, Juniper Networks, Inc.
)
O