Replacing An Ssd Drive On An Re-S-1800 - Juniper MX240 Hardware Manual

SEE ALSO
Preventing Electrostatic Discharge Damage to an MX240 Router | 467
Replacing Connections to MX240 Routing Engine Interface Ports | 299
MX240 Routing Engine Description | 69
SEE ALSO
SCB-MX Description
Effect of Taking the MX240 Host Subsystem Offline
Taking an MX240 Host Subsystem Offline
Replacing Connections to MX240 Routing Engine Interface Ports | 299
Preventing Electrostatic Discharge Damage to an MX240 Router | 467
Synchronizing Routing Engines

Replacing an SSD Drive on an RE-S-1800

Each RE-S-1800 Routing Engine supports two solid-state drives (SSD) specified by Juniper Networks. The
RE-S-1800 ships with one SSD installed in the slot labeled SATA SSD 1. The spare SSD is Juniper part
number SSD-32G-RE-S. Figure 87 on page 292
Routing Engine.
Figure 87: RE-S-1800 Storage Drive Slots
Auxiliary Ethernet
port port
Console
Extractor
port
clip
The following drive has been verified to work in the RE-S-1800 Routing Engine:
SSD-32G-RE-S
To replace a storage drive:
1. Disable and deactivate the storage drive.
shows the arrangement of storage drive slots on a RE-S-1800
Online/Offline SSD
button slot 1
Status LEDs
USB
port
SSD
slot 2
Extractor
clip
292