Figure 128: Removing An As Msc - Juniper MX240 Hardware Manual

See Also
Copyright © 2019, Juniper Networks, Inc.
Use one of the following methods to take the AS MSC offline:
3.
Press its online/offline button. Use a narrow-ended tool that fits inside the opening
that leads to the button. Press and hold the button until the AS MSC LED goes out
(about 5 seconds).
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot offline
For more information about the command, see the
Slide the AS MSC out of the AS MLC card carrier by pulling the handles, and place it
4.
in the electrostatic bag or on the antistatic mat.
If you are not reinstalling an AS MSC into the emptied AS MSC slot within a short time,
5.
install a blank AS MSC panel over the slot to maintain proper airflow in the AS MLC
card cage.

Figure 128: Removing an AS MSC

MX240 Application Services Modular Storage Card Description
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
Chapter 4: Maintaining, Installing and Replacing Components
CLI Explorer
.
305