Holding An Mx240 Dpc - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
See Also

Holding an MX240 DPC

256
PIC 2 Online
PIC 3 Online
Slot 1 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
Slot 2 Online
PIC 0 Online
PIC 1 Online
PIC 2 Online
PIC 3 Online
For further description of the output from the command, see the
MX240 Dense Port Concentrator (DPC) Description on page 93
MX240 Dense Port Concentrator (DPC) LEDs on page 98
Troubleshooting the MX240 DPCs on page 350
When carrying a DPC, you can hold it either vertically or horizontally.
NOTE: A DPC weighs 14.5 lb (6.6 kg). Be prepared to accept the full weight
of the DPC as you lift it.
To hold a DPC vertically:
Orient the DPC so that the faceplate faces you. To verify orientation, confirm that the
1.
text on the DPC is right-side up and the electromagnetic interference (EMI) strip is on
the right-hand side.
Place one hand around the DPC faceplate about a quarter of the way down from the
2.
top edge. To avoid deforming the EMI shielding strip, do not press hard on it.
Place your other hand at the bottom edge of the DPC.
3.
If the DPC is horizontal before you grasp it, place your left hand around the faceplate and
your right hand along the bottom edge.
To hold a DPC horizontally:
Orient the DPC so that the faceplate faces you.
1.
Grasp the top edge with your left hand and the bottom edge with your right hand.
2.
1x 10GE(LAN/WAN)
1x 10GE(LAN/WAN)
DPCE 40x 1GE R
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
DPCE 40x 1GE R
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
10x 1GE(LAN)
.
CLI Explorer
Copyright © 2019, Juniper Networks, Inc.