Connecting The Mx240 Router To Power; Tools And Parts Required For Mx240 Router Grounding And Power; Connections; Figure 69: Reinstalling An Fpc - Juniper MX240 Hardware Manual

See Also

Connecting the MX240 Router to Power

Tools and Parts Required for MX240 Router Grounding and Power Connections
Copyright © 2019, Juniper Networks, Inc.
Slide the FPC all the way into the card cage until you feel resistance.
7.
Grasp both ejector handles and rotate them clockwise simultaneously until the FPC
8.
is fully seated.

Figure 69: Reinstalling an FPC

SC B
SC B
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380

Tools and Parts Required for MX240 Router Grounding and Power

Connections on page 195
Grounding the MX240 Router on page 196
Connecting Power to an AC-Powered MX240 Router with Normal-Capacity Power
Supplies on page 197
Powering On an AC-Powered MX240 Router on page 198
Connecting Power to a DC-Powered MX240 Router with Normal-Capacity Power
Supplies on page 199
Powering On a DC-Powered MX240 Router with Normal Capacity Power
Supplies on page 202
Connecting an MX240 AC Power Supply Cord on page 204
Connecting an MX240 DC Power Supply Cable on page 204
Powering Off the MX240 Router on page 206
To ground and provide power to the router, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (-) screwdriver
Chapter 3: Initial Installation and Configuration
195