Replacing An Mx240 As Msc; Removing An Mx240 As Msc; Figure 127: Installing An As Mlc - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
See Also
See Also

Replacing an MX240 AS MSC

304
For more information about the command, see the
CAUTION: After the
removing the AS MLC again, removing an AS MLC from a different slot, or
inserting an AS MLC in a different slot.
You can also verify correct AS MLC and AS MSC or AS MXC functioning by issuing the
show chassis fpc and show chassis fpc pic-status

Figure 127: Installing an AS MLC

Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
Removing an MX240 AS MSC on page 304
1.
Installing an MX240 AS MSC on page 306
2.

Removing an MX240 AS MSC

AS MSCs are hot-insertable and hot-removable. When you remove an AS MSC, the router
continues to function.
The AS MSCs are located in the AS MLCs installed in the front of the router. An AS MSC
weighs 1.4 lb (0.6 kg).
To remove an AS MSC (see
Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the AS
1.
MSC.
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis.
OK LED lights steadily, wait at least 30 seconds before
.
SC B
SC B
Figure 128 on page 305):
.
CLI Explorer
Copyright © 2019, Juniper Networks, Inc.