Mx240 Flexible Pic Concentrator (Fpc) Leds; Figure 35: Fpc Installed In The Mx240 Router Chassis - Juniper MX240 Hardware Manual

See Also
See Also
Copyright © 2019, Juniper Networks, Inc.

Figure 35: FPC Installed in the MX240 Router Chassis

SC B
SC B
FPC Components
Each FPC consists of the following components:
FPC card carrier, which includes two PIC slots.
Up to two Packet Forwarding Engines, each consisting of one I-chip for Layer 3
processing and one Layer 2 network processor.
Midplane connectors and power circuitry.
Processor subsystem (PMB), which includes a 1.2-GHz CPU, system controller, 1 GB of
SDRAM, and two Gigabit Ethernet interfaces.
Two LEDs, located on the craft interface above the FPC, that display the status of the
FPC and are labeled
OK
on the craft interface, see
FPC online/offline button, located on the craft interface above the FPC
MX240 FPC Terminology
Replacing an MX240 FPC on page 269
Maintaining MX240 FPCs on page 264
Troubleshooting the MX240 FPCs on page 352

MX240 Flexible PIC Concentrator (FPC) LEDs

Two LEDs, located on the craft interface above the FPC, that display the status of the
FPC and are labeled and
OK
the craft interface, see "MX240 Component LEDs on the Craft Interface" on page
MX240 Flexible PIC Concentrator (FPC) Description on page 101
MX240 FPC Terminology
Replacing an MX240 FPC on page 269
Maintaining MX240 FPCs on page 264
and . For more information about the FPC LEDs located
FAIL
"MX240 Component LEDs on the Craft Interface" on page
. For more information about the FPC LEDs located on
FAIL
Chapter 1: Overview
36.
36.
103