Installing The Routing Engine Re-S-X6-64G; Figure 95: Removing A Routing Engine From An Mx960 Router - Juniper MX240 Hardware Manual
5g universal routing platform
Hide thumbs
Also See for MX240:
- Hardware manual (512 pages) ,
- Instruction for upgrading (35 pages) ,
- Quick start manual (31 pages)
Table of Contents
Advertisement
Copyright © 2019, Juniper Networks, Inc.
Figure 95: Removing a Routing Engine from an MX960 Router
Installing the Routing Engine RE-S-X6-64G
To install the Routing Engine RE-S-X6-64G:
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Ensure that the ejector handles are not in the locked position. If necessary, flip the
2.
ejector handles outward.
Place one hand underneath the Routing Engine to support it and carefully align the
3.
sides of the Routing Engine with the guides inside the opening on the Switch Control
Board SCBE2.
NOTE:
The Routing Engine RE-S-X6-64G is supported only on the SCBE2.
RE-S-X6-64G is not compatible with the SCB or the SCBE.
Slide the Routing Engine into the SCBE2 until you feel resistance, and then press the
4.
Routing Engine's faceplate until it engages the connectors.
Chapter 4: Maintaining, Installing and Replacing Components
245
Advertisement
Chapters
Table of Contents
Troubleshooting
