MX240 5G Universal Routing Platform Hardware Guide
192
Figure 65: Reinstalling a Power Supply
Reinstalling the Fan Tray After Installing the MX240 Router without a Lift
To reinstall the fan tray (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the fan tray on each side and insert it straight into the chassis. Note the correct
2.
orientation by the "this side up" label on the top surface of the fan tray.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis.
3.
Figure 66: Reinstalling a Fan Tray
Figure 66 on page
192):
Copyright © 2019, Juniper Networks, Inc.