Figure 31: Typical Dpcs Supported On The Mx240 Router; Figure 32: Dpc Installed Horizontally In The Mx240 Router - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
94
and the Packet Forwarding Engines housed on the DPC are enabled. Forwarding on other
DPCs continues uninterrupted during this process.
If a slot is not occupied by a DPC or an SCB, a blank panel must be installed to shield the
empty slot and to allow cooling air to circulate properly through the router.
Figure 31 on page 94 shows typical DPCs supported on the MX240 router. For more
information about DPCs, see the

Figure 31: Typical DPCs Supported on the MX240 Router

DPC 40x1GE
OK / F AIL
0/0 0/5
2/0 2/5
1/0 1/5
3/0 3/5

Figure 32: DPC Installed Horizontally in the MX240 Router

DPC Components
Each DPC consists of the following components:
DPC cover, which functions as a ground plane and a stiffener.
Fabric interfaces.
MX Series Interface Module Reference
DPC 4x10GE
OK /FA IL
Copyright © 2019, Juniper Networks, Inc.
.