Figure 98: Installing an MX480 Routing Engine
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX480 Router | 477
Replacing Connections to MX480 Routing Engine Interface Ports | 312
SEE ALSO
Replacing Connections to MX480 Routing Engine Interface Ports | 312
Effect of Taking the MX480 Host Subsystem Offline
Preventing Electrostatic Discharge Damage to an MX480 Router | 477
Replacing Connections to MX480 Routing Engine Interface Ports | 312
Synchronizing Routing Engines
Replacing an SSD Drive on an RE-S-1800
Each RE-S-1800 Routing Engine supports two solid-state drives (SSD) specified by Juniper Networks. The
RE-S-1800 ships with one SSD installed in the slot labeled SATA SSD 1. The spare SSD is Juniper part
number SSD-32G-RE-S.
Figure 99 on page 305
Routing Engine.
shows the arrangement of storage drive slots on a RE-S-1800
304