Juniper MX240 Hardware Manual page 125

Copyright © 2019, Juniper Networks, Inc.
so—SONET/SDH interface
xe—10-Gigabit Ethernet interface
For a complete list of media types, see Interface Naming Overview.
fpc—Slot in which the MPC is installed. On the MX240 router, the MPCs are represented
in the CLI as through
FPC 0
pic—Logical PIC on the MIC, numbered 0 or 1 when installed in slot 0, and 2 or 3 when
installed in slot 1. The number of logical PICs varies depending on the type of MIC. For
example, a:
20-port Gigabit Ethernet MIC has two logical PICs, numbered 0 and 1 when installed
in slot 0, or 2 and 3 when installed in slot 1.
4-port 10-Gigabit Ethernet MIC has two logical PICs numbered 0 and 1 when installed
in slot 0, or 2 and 3 when installed in slot 1.
100-Gigabit Ethernet MIC with CFP has one logical PIC numbered 0 when installed
in slot 0, or 2 when installed in slot 1.
For more information on specific MICs, see
page 116 in the
MX Series Interface Module Reference
port—Port number.
NOTE: The MIC number is not included in the interface name.
The MX240 router supports up to three MPCs that install horizontally and are numbered
from bottom to top. Each MPC accepts up to two MICs.
Figure 37 on page 126 shows an example of a 20-port Gigabit Ethernet MIC with SFP
installed in slot of an MPC in slot
0
NOTE: The 20-port Gigabit Ethernet MIC with SFP-E has a different port
numbering. See Gigabit Ethernet MIC with SFP (E)
.
FPC 2
"MICs Supported by MX Series Routers" on
.
.
2
Chapter 1: Overview
125