Figure 89: Installing An Ssd In The Routing Engine Re-S-X6-64G - Juniper MX240 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.
user@host>
request vmhost snapshot partition
If only disk1 is replaced:
a. Bring the Routing Engine online by pressing the ONLINE/OFFLINE button.
b. The router boots from disk2 . To be able to boot from disk1:
user@host>
request vmhost snapshot partition

Figure 89: Installing an SSD in the Routing Engine RE-S-X6-64G

1— Carrier
Copying vmhost and Junos OS from an USB disk when both the SSDs are replaced
together:
NOTE: To prepare a bootable USB disk, see
for RE-MX-X6, RE-MX-X8 and RE-PTX-X8 Routing Engines
Insert the USB disk in the
1.
After the Routing Engine boots from the USB, press
2.
confirm Install vmhost and Junos software on Primary and Secondary disk [y/N]?
the console.
After the installation is completed, press y when prompted to confirm
3.
to reboot from the SSD disk.
[y/N]?
Copying vmhost and Junos OS to the SSDs from the PXEBoot server:
Set up the PXEBoot server. See Copying VM Host Installation Package to the PXE Boot
1.
Server.
Bring the Routing Engine online by pressing the
2.
Chapter 4: Maintaining, Installing and Replacing Components
2— SSD card
Creating an Emergency Boot Device
slot on the Routing Engine.
USB
ONLINE/OFFLINE
.
when you are prompted to
y
Reboot now?
button.
on
239