Juniper MX240 Hardware Manual page 212

MX240 5G Universal Routing Platform Hardware Guide
212
This procedure connects the router to the network but does not enable it to forward
traffic. For complete information about enabling the router to forward traffic, including
examples, see the Junos OS configuration guides.
To configure the software:
Verify that the router is powered on.
1.
Log in as the "root" user. There is no password.
2.
Start the CLI.
3.
root# cli
root@>
Enter configuration mode.
4.
cli> configure
[edit]
root@#
Configure the name of the router. If the name includes spaces, enclose the name in
5.
quotation marks (" ").
[edit]
root@# set system host-name host-name
Create a management console user account.
6.
[edit]
root@# set system login user user-name authentication plain-text-password
New password: password
Retype new password: password
Set the user account class to super-user.
7.
[edit]
root@# set system login user user-name class super-user
Configure the router's domain name.
8.
[edit]
root@# set system domain-name domain-name
Configure the IP address and prefix length for the router's Ethernet interface.
9.
[edit]
Copyright © 2019, Juniper Networks, Inc.