MX240 5G Universal Routing Platform Hardware Guide
See Also
Storing an MX240 DPC
258
Figure 104: Do Not Rest the DPC on an Edge
If you must rest the DPC temporarily on an edge while changing its orientation between
vertical and horizontal, use your hand as a cushion between the edge and the surface.
MX240 DPC Terminology
Storing an MX240 DPC on page 258
Troubleshooting the MX240 DPCs on page 350
Replacing an MX240 DPC on page 259
You must store a DPC as follows:
In the router
In the container in which a spare DPC is shipped
Horizontally and sheet metal side down
When you store a DPC on a horizontal surface or in the shipping container, always place
it inside an antistatic bag. Because the DPC is heavy, and because antistatic bags are
fragile, inserting the DPC into the bag is easier with two people. To do this, one person
holds the DPC in the horizontal position with the faceplate facing the body, and the other
person slides the opening of the bag over the DPC connector edge.
Copyright © 2019, Juniper Networks, Inc.