Juniper MX240 Hardware Manual page 297

See Also
See Also
Copyright © 2019, Juniper Networks, Inc.
user@host>request chassis fpc slot slot-number online
For more information about the command, see the
To bring a PIC online:
Press the PIC offline/online button until the PIC LED lights green. For a PIC installed
in FPC3, use a narrow-ended tool that fits inside the opening that leads to the
button.
Issue the following CLI command:
user@host>request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see the
To bring a MIC online:
Press the MIC offline/online button until the PIC LED lights green.
Issue the following CLI command:
user@host>request chassis mic fpc-slot mpc-slot pic-slot mic-slot online
For more information about the command, see the
The normal functioning indicator LED confirms that the component is online. You can
also verify correct DPC or MPC functioning by issuing the
or correct MIC or PIC functioning by issuing the
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
Maintaining MX240 DPCs on page 254
Maintaining MX240 MPCs on page 282
Maintaining MX240 MICs on page 279
Maintaining MX240 PICs on page 288
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
Maintaining MX240 PICs on page 288
Troubleshooting the MX240 PICs on page 356
MX240 PIC Serial Number Label on page 369
MX240 PIC Description on page 104
Replacing an MX240 FPC on page 269
Chapter 4: Maintaining, Installing and Replacing Components
CLI Explorer
CLI Explorer
CLI Explorer
show chassis fpc
show chassis fpc pic-status
.
.
.
command
.
297