Install The Routing Engine Into The Scbe3-Mx; Install The Scbe3-Mx Into The Router Chassis; Complete The Scbe3-Mx Upgrade - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
344
Installing an MX240 Switch Control Board on page 328
Installing an MX480 Switch Control Board
Installing an MX960 Switch Control Board

Install the Routing Engine into the SCBE3-MX

Refer to the Routing Engine installation procedure for your MX model:
"Installing an MX240 Routing Engine" on page 232
Installing an MX480 Routing Engine
Installing an MX960 Routing Engine

Install the SCBE3-MX into the Router Chassis

Refer to the Switch Control Board installation procedure for your MX model:
"Installing an MX240 Switch Control Board" on page 328
Installing an MX480 Switch Control Board
Installing an MX960 Switch Control Board

Complete the SCBE3-MX Upgrade

Verify that the installation is successful and the SCBE3-MX is online:
1.
user@host> show chassis environment cb 0
CB 0 status
State Online
Temperature 30 degrees C / 86 degrees F
...
user@host> show chassis environment cb 1
CB 1 status
State Online
Temperature 30 degrees C / 86 degrees F
...
Other details, such as, temperature, power, etc are also displayed along with the state.
Verify that the fabric planes come online correctly:
2.
user@host> show chassis fabric summary
Plane State Uptime
0 Online 2 days, 19 hours, 10 minutes, 9 seconds
1 Online 2 days, 19 hours, 10 minutes, 9 seconds
...
Verify that the backup Routing Engine is back online:
3.
user@host> show chassis routing-engine 1
Copyright © 2019, Juniper Networks, Inc.