Replacing An Ssd Drive On An Re-A-1800 Or Re-S-1800; Figure 70: Installing An M120 Routing Engine - Juniper M120 Hardware Manual

M120 Multiservice Edge Router Hardware Guide
See Also
Related
Documentation

Replacing an SSD Drive on an RE-A-1800 or RE-S-1800

198
lights steadily, the Routing Engine is not functioning properly. Contact your customer
support representative.
To check the status of the Routing Engine, use the CLI command:
user@host> show chassis routing-engine
Routing Engine status:
...
For more information about using the CLI, see the Junos OS documentation.

Figure 70: Installing an M120 Routing Engine

M120 Routing Engine Description on page 22
M120 Routing Engine Interface Ports and Status Indicators on page 28
M120 Routing Engine Description on page 22
M120 Routing Engine Interface Ports and Status Indicators on page 28
Synchronizing Routing Engines
Each RE-1800 Routing Engine supports two solid-state drives (SSD) specified by Juniper
Networks. The RE-1800 ships with one SSD installed. The spare SSD is Juniper part
number RE-SSD-32G-UPG.Figure 71 on page 199
arrangement of storage drive slots on a RE-1800 Routing Engine.
Slot 0: Current state
and Figure 72 on page
Copyright © 2018, Juniper Networks, Inc.
Master
199show the