T4000 Core Router Hardware Guide
Related
Documentation
T4000 LED Overview
Craft Interface LEDs
Component LEDs
346
about using the CLI to troubleshoot Junos OS, see the appropriate Junos OS
configuration guide.
JTAC—If you need assistance during troubleshooting, you can contact the Juniper
Networks Technical Assistance Center (JTAC) by using the Web or by telephone. If
you encounter software problems, or problems with hardware components not
discussed here, contact JTAC.
T4000 Craft Interface Description on page 16
T4000 Craft Interface LEDs
T4000 Connector Interface Panel (CIP) Description on page 14
T4000 LED Overview on page 346
T4000 Alarm Messages Overview on page 347
Contacting Customer Support on page 375
Craft Interface LEDs on page 346
Component LEDs on page 346
The craft interface displays system status messages and allows you to troubleshoot the
router. See T4000 Craft Interface LEDs.
LEDs on the craft interface include:
Red and yellow alarm LEDs
FPC LEDs
Host subsystem LEDs
SIB LEDs
The following LEDs are located on various router components and display the status of
those components:
Control board LEDs
See
"T4000 LCC-CB Control Board LEDs" on page 31
Routing Engine LEDs
See
"T4000 RE-C1800 LEDs" on page
PIC LEDs
See T4000 Core Router Interface Module Reference.
35.
Copyright © 2018, Juniper Networks, Inc.