Connection Test - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
Downloading the program

After the program is compiled, select Transfer under the PLC tab and click Download to see the
Download page. You can also click
and the Comments so that you can upload the program in the CPU module later, and then click Transfer
again.

6.6.3 Connection Test

After you download a program to a PLC, you can monitor the execution status of the PLC through ISPSoft.
ISPSoft provides two monitoring modes; device monitoring mode and program monitoring mode.
Device monitoring mode
Program monitoring mode
*. You can enable the device monitoring function without program monitoring; however, if you enable the program
monitoring function, the device monitoring function is also enabled.
Monitoring mode
You can monitor the status of the devices in the PLC through the
monitoring table. In this mode, ISPSoft updates only the status of the
devices. The current program in ISPSoft does not have to be the same as
the program in the PLC.
In this mode, the operating status of the program is displayed in the
program editing window. The present program in ISPSoft must be the
same as the program in the PLC.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
on the toolbar to see the Download page. Select the Program
Description