Delta AS Series Operation Manual page 280

Send Quote Requests to info@automatedpt.com
5.5 Remote Module Addresses Defined by Software
This section uses ISPSoft for demonstration. For DIADesigner operation, refer to section 6.1 from
DIADesigner software manual.
Double-click the CPU module to see the setting page where you can set up the PLC parameters. Select
options on the left under the General or Data Exchange tab, you can see the setting items on the right under
the tab of the option you have selected.
• Click Function Card2 on the left to see the Function Card 2 Setting tab on the right and find setting
items under the tab.
•
For Card 2 Detect mode, select Manual. For Manual Select Card, select AS-FCOPM Card.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com