System Settings - Daylight Saving Timing - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
8.2.6 System Settings – Daylight Saving Timing
The parameters on Daylight Saving Timing table are used to enable or disable the function of daylight saving time
and set the date when the daylight saving is conducted. The clock will automatically set the daylight saving time in
advance based on the period of time set after the function is enabled.
Disable/Enable D.S.T Function

The parameter sets to enable or disable daylight saving time.
Start date- month

The parameter sets the month from which the daylight saving time starts.
Start date- day

The parameter sets the date on which the daylight saving time starts.
End date- month

The parameter sets the month in which the daylight saving time ends.
End date- day

The parameter sets the date on which the daylight saving time ends.
Saving time

The parameter is used to adjust to the earlier daylight saving time with the unit of minute.
Example explanation: example from the above image and all the options are enabled.
Date shown in SR Time shown in SR
3/31 23:59:58
3/31 23:59:59
4/01 01:00:00
4/01 01:00:01
: (to)
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
PLC time
(Real Time Clock)
23:59:58
23:59:59
00:00:00
00:00:01
: (to) : (to)
Remarks
Normal
Shown after 60 minutes