Connection Test - Delta AH Series Operation Manual

AH Mo t io n C on tr o ll er – O p er a t io n M a nu a l
4.6.3

Connection Test

After a program is downloaded to a PLC, you can monitor the execution status of the PLC through ISPSoft. There are two
monitoring modes that ISPSoft provide. One is the device monitoring mode, and the other is the program monitoring
mode.
Monitoring mode
Device monitoring mode
Program monitoring mode
*. The device monitoring function can be enabled independently. However, if the program monitoring function is
enabled, the device monitoring function is also enabled.
After you click Online Mode on the PLC menu, or
system will also enable the device monitoring mode and the program monitoring mode.
_4
In the online monitoring mode, you can view the present scan time, the communication status, and the status of the PLC
in the status bar in ISPSoft.
Besides, the present statuses of the devices will be displayed in the original program editing window after the program
monitoring function is enabled.
4 - 4 0
Description
You can monitor the statuses of the devices in the PLC through the monitoring table. In
this mode, ISPSoft only needs to update the statuses of the devices. The present
program in ISPSoft does not need to be the same as the program in the PLC.
In this mode, the operating status of the program is displayed in the program editing
window. As a result, the present program in ISPSoft must be the same as the program
in the PLC.
on the toolbar, the online monitoring function will be enabled. The