Delta AS Series Operation Manual page 510

Send Quote Requests to info@automatedpt.com
Device
Radix
Read only
Description
"Apply"
Operation Steps:

After log in, double-click Data monitor setup to open the setting page.
a.
b. Use "Edit" to edit the table name, device quantity, and update cycle time.
Item
Devices to be monitored; you can enter the following devices to
monitor xX, yY, mM, sSmM, sSrR, dD, sS, tT, cC, hHcC and eE.
Positional numeral system to be shown on the monitoring page;
available formats are Signed decimal, Unsigned decimal,
Hexadecimal, Octal, Binary, 32bit Signed decimal, 32bit Unsigned
decimal, 32bit Hexadecimal, 32bit Octal, 32bit Binary, 32bit Float
and 64bit Double
Set up the monitored devices to read only or not.
Add a description here for the table.
Click "Apply" to save the settings.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Description