Delta AS Series Operation Manual page 623

Send Quote Requests to info@automatedpt.com
Step 8: Once all the selected parameters are downloaded to the SD card of the AS Series PLC CPU, you can see the
information "All done".
Step 9: Use your computer to check if the backup file is saved in the SD card.
Remarks:
Default backup file path

AS100: \SDCard\PLC CARD\AS200\DevPara
AS200: \SDCard\PLC CARD\AS200\DevPara
AS300: \SDCard\PLC CARD\AS300\DevPara
File naming: mmmm_nn_tt_pppppppppppppppp.par

mmmm: device or module code (e.g. PLC CPU is 0000.)
nn: communication port number (e.g. PLC Ethernet communication port is 03.)
tt: communication protocol type (e.g. Ethernet communication is fixed to 01.)
pppppppppppppppp: device information (IP + ID + 000000 in the hexadecimal format)
For example: If the device IP is 192.168.1.9 and its ID is 9, the device information is C0A80109
(IP: 192 = 16#C0, 168=16#A8, 1=16#01, 9=16#09) + 09 (ID) + 000000 = C0A8010909000000.par
Step 10: You can use ISPSoft to set the Delta drive's number in SR1601 and SR1602 for easier operation when it is
required to use the restoration function on site.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
OK