Delta AS Series Operation Manual page 121

Send Quote Requests to info@automatedpt.com
AS-FCOPM

With its own standalone communication port, the extension card can work independently and can act as a
master or a sloave. After installing the extension card, go to the HWCONFIG in ISPSoft to set up the
communication.
 Wiring example
AS-F422

You can use this extension card for communication with Delta HMI series or other devices through the RS-422
communication port. You can use this extension card for communication with different interfaces such as RS-
232 and a PC. The communication functions and isolation levels are the same as the PLU CPU built-in ones.
It can be used in slave or master mode. After installing the extension card, go to the HWCONFIG in the
ISPSoft for communication setup.
 Wiring example of the communication with Delta HMI DOPA series via COM2
AS-F485

With its own standalone communication port, the extension card can work independently. You can use this
extension card for communication with different interfaces such as RS-232 and a PC. The communication
functions and isolation levels are the same as the PLU CPU built-in ones. It can be used in slave or master
mode. After installing the extension card, go to the HWCONFIG in the ISPSoft for communication setup.
 Wiring example
Master node
CAN _H CAN _L
GND
Terminal
resistor
(120 ohm)
AS-F422
Master node
D+ D- SG
Terminal
resistor
(120 ohm)
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Slave node
CAN _H CAN _L
GND
Shielded
cable
Delta HMI
RT S-
R+ Tx+
6
1 3
RT S+
R- Tx-
7
2 4
T+ Rx+
3
2 8
CT S+
T-
Rx-
9
4
1
CT S-
COM2/DB-9
Slave node
D+ D- SG
Shielded
cable
Slave node
GND CAN _H CAN _L
Terminal
resistor
(120 ohm)
series
DOPA
Slave node
SG D+ D-
Terminal
resistor
(120 ohm)
Shielded
cable