Delta AS Series Operation Manual page 488

Send Quote Requests to info@automatedpt.com
*1 Interface Flag Table
Bit (s)
0
1
2-4
5 Manual Setting Requires Reset
6
7-31
*2 Interface Capability Bits
Bits
0
1
2
3
4-31
Name
Link Status
Half/Full Duplex
Negotiation Status
Local Hardware Fault
Reserved
Item
Manual Setting Requires
Reset
Auto-negotiate
Auto-MDIX
Manual Speed/Duplex
Reserved
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
0 indicates an inactive link
1 indicates an active link
0 indicates half duplex
1 indicates full duplex
0：Auto-negotiation in progress
1：Auto-negotiation and speed detection failed
2：Auto negotiation failed but detected speed
3：Successfully negotiated speed and duplex
4：Auto-negotiation not attempted. Forced speed and duplex.
Set to zero
0: the interface detects no local hardware fault
1: a local hardware fault is detected
0
Description
Indicates if the device requires a reset when instance attribute #6
(Interface Control attribute) changes.
0 indicates the device does not require a reset
1 indicates the device requires a reset
0 indicates the interface does not support auto-negotiation
1 indicates the interface supports auto-negotiation
0 indicates the interface does not support auto MDIX operation
1 indicates the interface supports auto MDIX operation
0 indicates the interface does not support speed/duplex setting.
(Instance attribute #6, Interface Control attribute)
1 indicates the interface supports speed/duplex setting
Should be 0
Description