Delta AS Series Operation Manual page 115

Send Quote Requests to info@automatedpt.com
AS04SIL-A

7
8
Number
1
2
3
4
5
6
7
8
Name
Model name Model name of the module
Indicates the status of the power supply
POWER LED indicator ON: the power is on
OFF: no power or the power is low
Error status of the module
OFF: The module is normal.
Module LED indicator Blinking:
 Module setting or communication error (blinks every 1 second)
 Hardware or low power error (blinks every 0.2 second)
Error status of the network
ON: No external power supply
Network LED indicator
Blinking: Scanning is under going or the module is configured and the
diagnosis is done.
OFF: The module is configured but the diagnosis has not done yet.
IO-Link connection status of each communication port
ON: The communication port is in IO-Link mode and a device is
connected.
C1, C2, C3, C4 LED
indicator (orange)
Blinking: The communication port is in IO-Link mode but no device is
connected or thhe device connected is not configured.
OFF: The communication port is disabled or in SIO mode.
Indicates the status of input / output in SIO mode
Q1, Q2, Q3, Q4 LED
ON: The input/output is working in SIO mode.
indicator (orange)
OFF: The communication port is disabled or in IO-Link mode.
Indicates if any warning or error occurs in the IO-Link connection
E1, E2, E3, E4 LED
Blinking: A warning or error occurs
indicator (red)
OFF: No warnings or errors
Removable terminal
IO-Link
block
Arrangement of the
Arrangement of the terminals
input/output terminals
Terminal block clip Removal of the terminal block
DIN rail clip Secures the module onto the DIN rail
Module connecting set Connects the modules
Label Nameplate
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
38.2
1
04 SI L
CQ 1
L1+
PWR
-
DI 1 L1
2
MS
CQ2 L2+
NS
DI2 -
L2 C1
Q1
CQ3 L3+
E1
C2
-
DI3 L3
3
Q2
E2
CQ4 L4+
C3
-
DI4 L4
Q3
E3
24 V 4
●
C4
0V
Q4
E4
5
6
35
Unit: mm
Description
95
7
75