Delta AS Series Operation Manual page 427

Send Quote Requests to info@automatedpt.com
When the device is connected, this tab is shown as EIP Parameter. You can click the Upload button to upload the related
parameters from the device. Or click the Download button to download the related parameters to the device.
①
Module Status
②
IP Setting
④
Port Status
Name



Note: when there is a Port2, that means there are 2 Ethernet
communication ports.

Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Definition
Identification: displays information regarding Vendor, Product
Type, Product Name, Revision, etc.
Status: displays connection status, including Major Fault,
Minor Fault, Internal State, Configuration Status, and Module
Identity.
Port1: indicates port 1 of the device, for editing IP Address,
Subnet Mask, Gateway Address, and Host Name.
Displays Link Status, Speed, Duplex, Negotiation Status and
Hardware Fault.