Delta AS Series Operation Manual page 120

Send Quote Requests to info@automatedpt.com
AS-F2DA

Two DC analog signal output channels:
Item
Analog Signal
Resolution
Digital Conversion
Limit
Error Rate
Isolation
Impedance
Allowance
Conversion Time*
Characteristic
Curve
Digital Value
Output* 2
*1: The conversion time is the time for each channel to convert signals to hardware input signals. If you need
to calculate a complete conversion time, you need to add the PLC scan time.
*2: Use the MOV instruction to move the value to the SR to obtain the corresponding voltage output value.
AS-F232

The AS series PLC is built with COM1 (RS-485), and COM2 (RS-485). You can use this extension card for
communication with different interfaces such as RS-232 and a PC. The communication functions and isolation
levels are the same as the PLU CPU built-in ones. It can be used in slave or master mode. After installing the
extension card, go to the HWCONFIG in the ISPSoft for communication setup.
 Wiring example
AS-F232
+
(DB9 female)
Voltage Output
0 V - 10 V
12-bit
0 - 4000
room temperature: ±0.5% ; full temperature range: ±1.0%
The isolation between digital and analog is 500 VAC; no isolation between channels.
≥1 kΩ
1
10V
0
Di gital Value Input
Card 1
Card 2
DB9 male to DB9 female (standard cable)
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
2ms / CH
4000
SR172 (CH1)
SR174 (CH1)
Current Output
4 mA - 20 mA
12-bit
0 - 4000
≤500 Ω
20mA
4
4000
Digital Value Input
SR173 (CH2)
SR175 (CH2)
Superior
+
machine