Delta AS Series Operation Manual page 123

Send Quote Requests to info@automatedpt.com
AS-FFTP01

With its own standalone communication port, the extension card can work independently and can be set as a
MODBUS TCP server, Client or EtherNet/IP Adapter. After installing the extension card, go to the HWCONFIG
in ISPSoft to set up the communication.
Ethernet communication interface
Connector type
Transmission speed
Cable
Communication protocol
Isolation
Micro SD
Applicalbe SD card
Capacity
Speed class rating
Busbar interface
AS-FECAT

This communication card can work independently and does NOT occupy the communication port of PLC CPU.
It can act as Modbus TCP Server and EtherCAT Master. After AS-FECAT is installed, you can go to
HWCONFIG from ISPSoft for editing in the Function Card 2 section.
Ethernet communication interface
Connector type
Transmission speed
Cable
Communication protocol
Isolation
Item
Item

It is suggested to use the Micro SD with 32GB capacity and Class10 rating
Item
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
RJ-45*2
10/100BASE-T (X) full duplex, switched Ethernet
CAT5e (up to 100 m)
Modbus TCP Server, Client and EtherNet/IP Adapter
1500 VAC
Micro SD card
Max.<= 2TB (SD/SDHC/SDXC)
Class 10 (C1)
High Speed (25MB/s)
RJ-45*2
10/100BASE-T (X) full duplex, switched Ethernet (before EtherCAT
Master enabled)
CAT5e (up to 100 m)
Modbus TCP Server and EtherCAT Master
1500 VAC
Specifications
Specifications
Specifications