Delta AS Series Operation Manual page 211

Send Quote Requests to info@automatedpt.com

Wiring the External Terminal Module UB-10-OR16A
For cables that can only be connected to the cables of group #1, see below.
Output form
Voltage specifications
39 40
1 2
C0 Y0.0 Y0.1 Y0.2 Y0.3
Note: UB-10-OR16A can be used with AS Series and DVP Series. The indications on the UB-10-OR16A board
is for DVP Series. For the definitions of terminal connections for AS Series, you can see the reference table
below. Or refer to the enclosed sticker for AS Series.
AS
DVP
Relay
Less than 250 VAC, 30 VDC, 2 A
Length
C1 Y0.4
C0 Y0.0 Y0.1 Y0.2 Y0.3 C1
C0 Y0 Y1 Y2 Y3 C1
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
19 20
#1
1 2
19 20
#2
1 2
500+10mm
-
C2
Y0.5 Y0.6 Y0.7 Y0.8 Y0.9 Y0.10 Y0.11
Y0.4 Y0.5 Y0.6 Y0.7 C2 Y0.8 Y0.9 Y0.10 Y0.11 C3 Y0.12 Y0.13 Y0.14 Y0.15
Y4 Y5 Y6 Y7 C2 Y10
Length:
UC-ET010-24D(1M)(28AWG)
UC-ET020-24D(2M) (28AWG)
UC-ET030-24D(3M) (28AWG)
C3 Y0.12 Y0.13
Y11 Y12 Y13 C3 Y14 Y15
GND +24V
Y0.14 Y0.15
Y16 Y17