Delta AS Series Operation Manual page 314

Send Quote Requests to info@automatedpt.com Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Download Run
Not Download Stop
(4) After you successfully download the hardware configuration to the CPU module, the BUS FAULT
LED indicator on the CPU module is OFF. Close the HWCONFIG window. If the BUS FAULT LED
indicator on the CPU module is still ON or blinking, the CPU module is in an abnormal state. Make
sure the actual hardware configuration is the same as the hardware configuration in the HWCONFIG
window, and refer to the operation manual for more information about eliminating the error. Refer to
Chapter 8 for more information about HWCONFIG.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com