Starting Addresses For Analog Input/Output Modules - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
Note: though there is no information on the occupied data devices in the image shown above, the CPU
reserves 20 words of data devices.

5.4.2 Starting Addresses for Analog Input/Output Modules

HWCONFIG automatically assigns consecutive input and output data registers starting from D28000 to an
analog input/output module in ISPSoft according to the number of registers defined for the analog input/output
module.
1. 04AD: There are four input channels. The input device range occupies 20 data registers.
2. 08AD: There are eight input channels. The input device range occupies 20 data registers.
3. 004DA: There are four output channels. The input device range occupies two data registers and the
output device range occupies 18 data registers.
4. 06XA: There are four input channels and two output channels. The input device range occupies 10 data
registers, and the output device range occupies 10 data registers.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com