Table of Contents
Advertisement
AH M o ti on Co n tro l ler – Har dware Manual
Component
Dummy
module
_2
2.2 Software Connection
Through the network interfaces on the AH motion CPU and the motion backplane, you can connect the CPU to the host
computer with RS-232(USB), RS-485, and Ethernet networks. In this configuration, you can also connect ISPSoft with
AH500 series PLCs. Refer to ISPSoft User Manual for information on the procedures of the connections between the AH
Motion system and the ISPSoft.
EtherNet/IP S canner
/
AH500 AH Motion
series P LCs
2 - 1 0
Model Name
AHASP01-5A
Dummy module used for an empty I/O slot
EtherNet/IP Network
Description
PLC Software
ISPSoft
RS-232
RS-485
P
AH Motion CPU
Advertisement
Table of Contents
