Delta AS Series Operation Manual page 418

Send Quote Requests to info@automatedpt.com

Enable BOOTP

Enable DHCP

Disable BOOTP/DHCP
Steps to set the IP address:

1. MAC address: find the MAC address on the EIP device. The MAC address uniquely identifies the device.
2. Open the DHCP Server
HWCONFIG : Click Tool and then click DHCP Server.


The IP Manager can be the BOOTP/DHCP Server, receiving IP address requests from devices. The IP
Manager window is shown below.
Enables the BOOTP to assign an IP address for the selected item.
Enables the DHCP to assign an IP address to the selected item.
Disables the BOOTP/DHCP on the device; the device does not request an IP
addresses from the server.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com