Network - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
Notes

Enable BOOTP: when the IP address receiving mode is BOOTP (BOOTP is enabled), the IP address is
assigned, and the device sends out BOOTP requests for IP addresses during each power-on.

Enable DHCP: when the IP address receiving mode is DHCP (DHCP is enabled), the IP address is assigned,
and the device sends out DHCP requests for IP addresses during each power-on.

Disable DHCP/BOOTP: when BOOTP is disabled, the device does not send out any DHCP/BOOTP requests
for IP addresses during each power-on.
9.4.3

Network

HWCONFIG provides a graphical user interface, and you can see the devices and their EtherNet/IP connections in the
Network View.
EtherNet/IP Page

Toolbar

Network View

Configuration Area

Product List
Item
Toolbar buttons
Displays the connected devices and their connection status
Displays the configurations and allows you to set the parameters
Displays the available devices that can be connected to EtherNet/IP
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Definition