1-1002 XPM card replacement procedures (continued)
NTMX72
in an SMA2
Application
Use this procedure to replace an NTMX72 card in an SMA2.
PEC
NTMX72
Common procedures
The following procedures are referenced in this procedure:
•
•
•
Do not go to a common procedure unless directed to do so in the step-action
procedure.
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows the
flowchart.
297-8021-547 Standard 14.02 May 2001
Suffixes
AA, AB
"Locating a faulty card in an SMA2"
replacing a card
returning a card
Name
Power Converter